Two other common sandwich-panel cores. EPS is cheaper and less insulating. Rockwool is non-combustible and heavier. This page compares them with PUF/PIR so you can choose the right core; ask us if your project needs one.
Transport extra, quoted separately for your pincode · Flashing as per your requirement
Quick answer
What is a eps & rockwool panels?
Two other common sandwich-panel cores. EPS is cheaper and less insulating. Rockwool is non-combustible and heavier. This page compares them with PUF/PIR so you can choose the right core; ask us if your project needs one.
Thickness
50–150 mm
U at 100 mm
≈ 0.21 W/m²K
Family
Continuous
Rate
On request · transport extra
Why this panel
What you get
1
PUF/PIR insulates best
k ≈ 0.022 against ≈0.035–0.038 (EPS) and ≈0.040–0.045 (rockwool) W/mK. For the same U, PUF can be much thinner.
2
Rockwool for fire walls
When a tested fire-resistance rating is needed, rockwool is the usual choice.
3
EPS on budget
Fine for dry, ambient-temperature cabins. Not recommended for cold rooms.
Continuous family: made on a continuous line, tongue-and-groove edge, cut to length. Typical; varies by brand. Continuous or cam-lock?
Photos are representative stock images (see credits), not our projects.
Specification
Typical spec, all brands
Typical ranges; they vary by brand. Exact values for your order are stated in the quote and on the maker’s datasheet.
FamilyContinuous panel: made on a continuous lamination line
UseWall
CoreEPS (expanded polystyrene) or rockwool (mineral wool)
Calculated for the core with k ≈ 0.022 W/mK (PUF reference; EPS and rockwool need 1.6–2× the thickness for the same U). Lower U means less heat gets through. U = 1 / (0.13 + d/k + 0.04).
What thickness does the eps & rockwool panels come in?
Commonly 50, 75, 100, 150 mm (typical; varies by brand). Continuous panels are cut to length on the line.
What is the U-value of a 100 mm eps & rockwool panels?
About 0.21 W/m²K, calculated for the core with k ≈ 0.022 W/m·K: U = 1 / (0.13 + d/k + 0.04). Joints, fixings and doors add heat gain in a real building.
What is the core density and skin?
Core density EPS 15–20 kg/m³ · Rockwool 80–120 kg/m³ (typical). Skins: Coated steel 0.4–0.6 mm. Cover width ~950–1200 mm.
The panel rate depends on thickness, skin gauge and coating, core, brand and quantity, so we quote today’s rate per brand for your specification. Transport is extra and quoted separately for your pincode; flashing is made as per your requirement.
Where is the eps & rockwool panels used?
Rockwool: fire walls, compartment partitions; EPS: budget cabins, temporary sheds.
Rates move with steel and chemical prices, so we quote fresh every time, with every available brand on one sheet. Transport is extra and quoted separately.
A call back from our team
The same spec priced across the brands available to you
Panel rate per brand; transport extra, quoted for your pincode with the transit time
By application7 uses
CalculatorArea, count, BOQ
Unit converterft ↔ m, sq ft ↔ m²
BrandsCompare in one quote
Dispatch cities20 cities
GuidesPrice, thickness, PIR
50–150 mm
40–60 mm
50–100 mm