Skip to content
WhatsAppGet today’s rate
  1. Home
  2. Panels
  3. Cold-room
Walk-in chillers · freezers

Cold-room panel

Panels made for walk-in cold rooms: wall, ceiling and floor panels with cam locks or T&G, food-grade coatings, and hygienic coving at the junctions.

Get the best price

Thicknesses commonly made
60 mm80 mm100 mm120 mm150 mm
  • Cam-lock
  • Wall · roof / ceiling
Joint
Cam-lock
U at 100 mm
0.21 W/m²K
Length
To room height / span
RateToday’s rate on request
Panel rate per brand · transport extra
Get best price
Call +91 75795 67676

Transport extra, quoted separately for your pincodeFlashing as per your requirement

Quick answer

What is a cold-room panel?

Panels made for walk-in cold rooms: wall, ceiling and floor panels with cam locks or T&G, food-grade coatings, and hygienic coving at the junctions.

Thickness
60–150 mm
U at 100 mm
≈ 0.21 W/m²K
Family
Cam-lock
Rate
On request · transport extra
White insulated panel cold room with hinged doors
Modular walk-in cold room built from insulated panels
Frost on boxes inside a freezer
Why this panel

What you get

1

Wall + ceiling + floor

One order covers the whole box, including floor panels for freezers so the slab does not freeze.

2

Food-grade faces

Smooth white PPGI or SS 304 for areas that are washed down.

3

Door-ready

Panels are cut around hinged and sliding door frames. Doors are quoted with the panels.

Cam-lock hook + T&GLocked with a hex key
Cam-lock family: pressed in batches, hooks foamed into the edges, locked with a hex key. Typical; varies by brand. Continuous or cam-lock?

Photos are representative stock images (see credits), not our projects.

Specification

Typical spec, all brands

Typical ranges; they vary by brand. Exact values for your order are stated in the quote and on the maker’s datasheet.

FamilyCam-lock panel: made in a batch (discontinuous) press with cam-lock hooks
UseWall · roof / ceiling
CorePUF or PIR
Thickness options60 / 80 / 100 / 120 / 150 mm
Core density38–42 kg/m³ (typical; varies by brand)
SkinsPPGI 0.5 mm common; SS 304 for wash-down rooms
Width1000–1200 mm
LengthCut to the room height / span; floor panels with heavier skins on request
JointCam-lock or T&G, with PVC / aluminium coving
CoatingsFood-grade PPGI (white) · SS 304 · PPGL · Aluminium
FirePUF is combustible; PIR available. Check what your insurer needs.
Accessories

Flashing, made to your requirement

We do not auto-count flashing. Tell us the profile, girth, length and colour of each trim and it is made to match your panels.

  • CornerInside and outside wall corners
  • RidgeCaps the roof apex
  • DripThrows water off the edge
  • SkirtingWall-to-floor junction
  • Door-frame trimAround door openings
  • Send profile, girth and colour
Site measurements in feet?Convert ft ↔ m, sq ft ↔ m² and more, with the formula shown.
Feet
Metres3.658m
Formula

Metres = Feet × 0.3048

12 ft × 0.3048 = 3.658 m

1 ft = 0.3048 m (exact)

All conversions, room area and the formula card

Thermal performance

U-value by thickness

Calculated for the core with k ≈ 0.022 W/mK. Lower U means less heat gets through. U = 1 / (0.13 + d/k + 0.04).

The core only. Joints, fixings and doors add heat gain in a real room. Which thickness for which temperature?

60 mm0.35
80 mm0.26
100 mm0.21
120 mm0.178
150 mm0.143

Bar length = heat let through, relative to 60 mm. Figures in W/m²K.

Where it goes

Uses

+2 to +8 °C chillers (80–100 mm typical)−18 to −25 °C freezers (120–150 mm typical)Dairy, meat, vaccines, flowers
Cold store with white insulated panel walls and trolleys+2 °C to −25 °C

Cold storage

80–150 mm (typical)

Dairy processing hall with steel tanksAmbient to −25 °C

Food processing

60–200 mm (by zone)

Clean room with flush panel walls and a view windowControlled

Pharma & clean rooms

50–80 mm (typical)

Banana ripening chambers built with insulated panels+12 °C to +20 °C

Ripening chambers

80–100 mm (typical)

Questions

Cold-room panel FAQ

Typical values; the quote and the maker’s datasheet state the figures for your order.

Panel guides
What thickness does the cold-room panel come in?

Commonly 60, 80, 100, 120, 150 mm (typical; varies by brand). Cam-lock panels are made in batch presses, which suits thick cores.

What is the U-value of a 100 mm cold-room panel?

About 0.21 W/m²K, calculated for the core with k ≈ 0.022 W/m·K: U = 1 / (0.13 + d/k + 0.04). Joints, fixings and doors add heat gain in a real building.

What is the core density and skin?

Core density 38–42 kg/m³ (typical; varies by brand). Skins: PPGI 0.5 mm common; SS 304 for wash-down rooms. Cover width 1000–1200 mm.

Is the cold-room panel fire rated?

PUF is combustible; PIR available. Check what your insurer needs.

What is the price of the cold-room panel?

The panel rate depends on thickness, skin gauge and coating, core, brand and quantity, so we quote today’s rate per brand for your specification. Transport is extra and quoted separately for your pincode; flashing is made as per your requirement.

Where is the cold-room panel used?

+2 to +8 °C chillers (80–100 mm typical); −18 to −25 °C freezers (120–150 mm typical); Dairy, meat, vaccines, flowers.

Related panels

Also consider

All panels
Enquiry

Rate for cold-room panels

Rates move with steel and chemical prices, so we quote fresh every time, with every available brand on one sheet. Transport is extra and quoted separately.

  • A call back from our team
  • The same spec priced across the brands available to you
  • Panel rate per brand; transport extra, quoted for your pincode with the transit time

Tell us what you need

Name, mobile and city are enough. Everything else helps us quote faster.

Transport extra, quoted separately for your pincodeFlashing as per your requirement

No spam. We use your number only to send this quote. See privacy.

Prefer to talk? Call or WhatsApp +91 75795 67676. Prefer email? Send your size, thickness and city to sales@pufpanel.in