Skip to content
WhatsAppGet today’s rate
  1. Home
  2. Panels
  3. Prefab cabin
Site offices · labour camps · guard rooms

Prefab cabin panel

Thinner PUF panels for portable cabins, site offices, labour accommodation and security huts. Light enough to handle by hand, and insulated enough to keep an AC load reasonable.

Get the best price

Thicknesses commonly made
40 mm50 mm60 mm
  • Continuous
  • Wall · roof / ceiling
Joint
Tongue & groove
U at 50 mm
0.41 W/m²K
Cut length
Up to ~12 m
RateToday’s rate on request
Panel rate per brand · transport extra
Get best price
Call +91 75795 67676

Transport extra, quoted separately for your pincodeFlashing as per your requirement

Quick answer

What is a prefab cabin panel?

Thinner PUF panels for portable cabins, site offices, labour accommodation and security huts. Light enough to handle by hand, and insulated enough to keep an AC load reasonable.

Thickness
40–60 mm
U at 50 mm
≈ 0.41 W/m²K
Family
Continuous
Rate
On request · transport extra
Row of prefab site offices at a project in Gadarwara, India
Small building being built from insulated sandwich panels
Worker at a prefab site office cabin
Why this panel

What you get

1

Light and quick

A small team can put up a cabin shell in days. The exact time depends on size and the frame.

2

Re-usable

Screw-fixed panels can come down and move to the next site.

3

Cooler than bare sheet

50 mm PUF calculates to U ≈ 0.41 W/m²K. A bare sheet gives almost no insulation.

Tongue & grooveScrew-fixed or hidden-fix
Continuous family: made on a continuous line, tongue-and-groove edge, cut to length. Typical; varies by brand. Continuous or cam-lock?

Photos are representative stock images (see credits), not our projects.

Specification

Typical spec, all brands

Typical ranges; they vary by brand. Exact values for your order are stated in the quote and on the maker’s datasheet.

FamilyContinuous panel: made on a continuous lamination line
UseWall · roof / ceiling
CorePUF (EPS on budget builds)
Thickness options40 / 50 / 60 mm
Core density38–42 kg/m³ (typical; varies by brand)
SkinsPPGI 0.35–0.5 mm
Width1000–1200 mm
LengthCut to cabin height / roof span
JointTongue & groove; aluminium or steel trims
CoatingsPPGI (off-white, grey, blue) · PPGL
FireStandard PUF is combustible; FR grades are available from some makers.
Accessories

Flashing, made to your requirement

We do not auto-count flashing. Tell us the profile, girth, length and colour of each trim and it is made to match your panels.

  • CornerInside and outside wall corners
  • RidgeCaps the roof apex
  • DripThrows water off the edge
  • SkirtingWall-to-floor junction
  • Door-frame trimAround door openings
  • Send profile, girth and colour
Site measurements in feet?Convert ft ↔ m, sq ft ↔ m² and more, with the formula shown.
Feet
Metres3.658m
Formula

Metres = Feet × 0.3048

12 ft × 0.3048 = 3.658 m

1 ft = 0.3048 m (exact)

All conversions, room area and the formula card

Thermal performance

U-value by thickness

Calculated for the core with k ≈ 0.022 W/mK. Lower U means less heat gets through. U = 1 / (0.13 + d/k + 0.04).

The core only. Joints, fixings and doors add heat gain in a real room. Which thickness for which temperature?

40 mm0.50
50 mm0.41
60 mm0.35

Bar length = heat let through, relative to 40 mm. Figures in W/m²K.

Where it goes

Uses

Portable cabins and site officesLabour campsSecurity cabinsFarm stores and pump houses
Row of prefab site offices at a project in Gadarwara, IndiaAmbient: comfort

Prefab site offices & cabins

40–60 mm (typical)

Large modern warehouse clad in insulated metal panelsAmbient: heat control

Warehouses & industrial sheds

30–60 mm (typical, ambient)

Questions

Prefab cabin panel FAQ

Typical values; the quote and the maker’s datasheet state the figures for your order.

Panel guides
What thickness does the prefab cabin panel come in?

Commonly 40, 50, 60 mm (typical; varies by brand). Continuous panels are cut to length on the line.

What is the U-value of a 50 mm prefab cabin panel?

About 0.41 W/m²K, calculated for the core with k ≈ 0.022 W/m·K: U = 1 / (0.13 + d/k + 0.04). Joints, fixings and doors add heat gain in a real building.

What is the core density and skin?

Core density 38–42 kg/m³ (typical; varies by brand). Skins: PPGI 0.35–0.5 mm. Cover width 1000–1200 mm.

Is the prefab cabin panel fire rated?

Standard PUF is combustible; FR grades are available from some makers.

What is the price of the prefab cabin panel?

The panel rate depends on thickness, skin gauge and coating, core, brand and quantity, so we quote today’s rate per brand for your specification. Transport is extra and quoted separately for your pincode; flashing is made as per your requirement.

Where is the prefab cabin panel used?

Portable cabins and site offices; Labour camps; Security cabins; Farm stores and pump houses.

Related panels

Also consider

All panels
Enquiry

Rate for prefab cabin panels

Rates move with steel and chemical prices, so we quote fresh every time, with every available brand on one sheet. Transport is extra and quoted separately.

  • A call back from our team
  • The same spec priced across the brands available to you
  • Panel rate per brand; transport extra, quoted for your pincode with the transit time

Tell us what you need

Name, mobile and city are enough. Everything else helps us quote faster.

Transport extra, quoted separately for your pincodeFlashing as per your requirement

No spam. We use your number only to send this quote. See privacy.

Prefer to talk? Call or WhatsApp +91 75795 67676. Prefer email? Send your size, thickness and city to sales@pufpanel.in